How to set a pump to a specific address.

To set the pump Address:

1. Connect one pump to the computer.
2. Select "Open" from the Pump Network menu.
3. You should see a pump appear in the list box - most likely with the address/name of "0".
4. Select that pump in the listbox so it is highlighted.
5. In the command text box type "*ADR1". This tells the pump to set it's address to #1
6. You will  now see two pumps in the listbox. Only the newly set address is valid.
7. Close the serial port via the menu.
8. Connect the pumps together and to the computer then open the network again from the menu. Your changes should now be visible in the address assignments.